Rammax 1575 New to the trench roller range is the Rammax 1575 with both articulation and oscillation. It sets new standards regarding noise emissions and most of all fuel consumption. With the oscillation function the machine adapts to the surface and therefore allows optimised compaction results and stable running.

Four powerful hydraulic motors and two hydraulic steering cylinders guarantee dynamic drive performance and perfect mobility, even in small spaces. The fully automatic engine control system reduces the rpm to idle during standstill. With the first operation the engine rises within a split second back to working speed. This substantially helps to reduce the Diesel consumption and noise emmissions.

The Rammax 1585 is the latest development of the existing skid steer controlled trench rollers. So, today, this machine sets the benchmark regarding compaction results and maneuverability in smallest work space. Large reductions have also been made concerning the noise emissions by using a completely new design of the exhaust system. These enormous noise reductions guarantee a comfortable use for the operator today.

Filed under: Rammax Trench Rollers by Developer91
No Comments »

AP 240 The latest generation of Ammann rubber tyre rollers was developed according to the most recent insights into compaction on both bituminous asphalt layers and natural surfaces. A high-impact kneading effect is a property unique to pneumatic tyred rollers. The high wheel load and elasticity of pneumatic tyres provide a constant sealing effect. The AP 240 represents the worldwide proven hydrodynamic driven 10 to 24 tonne PTR.

Benefits at a glance

• Powerful Cummins engine and hydrodynamic drive
• Ballasting from 9,500-24,000 kg
• Central tyre inflation system for optimum tyre pressure
• Patented isostatic front axle with two dipping cylinders
• Sprinkler system
• Spacious panorama cab, heated and ventilated
• Perfect view of the working environment
• Simple to operate through two workplaces
• Large operating temperature range from -15 to +45° C
• Large ballast box 1.8 m³
• Water proof frame for fast and simple ballasting
• Small turning radius
• Hydrostatic steering
• Good service point accessibility

Filed under: Compaction Equipment, Pneumatic tyred rollers, Rental and Sales by Developer91
No Comments »

AP 240 H The latest generation of AP 240 H hydrostatic pneumatic tyred rollers is based on long-standing experience and was developed according to most recent technological insights. The AP 240H offers safe, simple and fast ballasting to be a versatile machine with 10 to 24 tonnes operating weight.

Benefits at a glance

• Powerful Cummins engine and hydrodynamic drive
• Ballasting from 10,000-24,000 kg
• Central tyre inflation system for optimum tyre pressure
• Patented isostatic front axle with two dipping cylinders
• Sprinkler system
• Spacious, comfortable cabin
• Perfect view of the working environment
• Simple operation thanks to a sliding operator station
• Cabin equipped with heating and ventilation
• Hydrostatic steering
• Large 3 m³ ballast bunker
• Water proof frame for fast and simple ballasting
• Small turning radius
• More than 25 hrs continuous operation
• Simple and safe to ballast

Filed under: Compaction Equipment, Pneumatic tyred rollers by Developer91
No Comments »

Best lifting performance

• High Performance lifting capacity
• High maximum reach capacity

Best Precision and user comfort

• Full hydrostatic transmission for more confort and productivity
• Smooth boom design with everything inside for best side visibility
• Dangerous movements cut out switch

Compact and Strong

• 5 m Length
• Tilt corrector as standard

Filed under: Aerial Work Platforms, Telehandler by Developer91
No Comments »

Adaptability and Performance

• Optimised load rating
• Hydraulic control for standard accessories
• Tilt corrector as standard

Power and precision

• Standard hydrostatic transmission
• Simultaneous and proportional controls of all 4 movements of the boom with flow sharing

Safety and reliability

• Standard rear axle locking
• Dangerous movements cut out switch

Filed under: Aerial Work Platforms, Telehandler by Developer91
No Comments »

Adaptability and Performance

• Optimised load rating
• Hydraulic control for standard accessories
• Tilt corrector as standard

Power and precision

• Standard hydrostatic transmission
• Simultaneous and proportional controls of all 4 movements of the boom with flow sharing

Safety and reliability

• Standard rear axle locking
• Dangerous movements cut out switch

Filed under: Aerial Work Platforms, Telehandler by Developer91
Comments Off

Best lifting performance

• Optimised load rating
• High maximum reach capacity

Best Precision and user comfort

• Full hydrostatic transmission for more confort and productivity
• Smooth boom design with everything inside for best side visibility
• Dangerous movements cut out switch

Compact and Strong

• 5 m Length
• Stabilizers lowering on a 2,26 m width

Filed under: Aerial Work Platforms, Telehandler by Developer91
No Comments »

• Automatic oscillation locking on rear supports allowing a significant improvement in platform lateral
• stability when handling good
• Possible combination of mast / telescopic / arm / excavation and accessories movements
• Ergonomic and flexible joystick with 4 integrated proportional functions
• Hydrostatic transmission
• 4-wheel drive and steering
• Stabilizers
• Tilt corrector: ±10°
• Smooth approach movements thanks to inching system
• ROPS/FOPS cabin with heating and ventilation

Filed under: Aerial Work Platforms, Telehandler by Developer91
No Comments »

• Automatic oscillation locking on rear supports allowing a significant improvement in platform lateral
• stability when handling good
• Possible combination of mast / telescopic / arm / excavation and accessories movements
• Ergonomic and flexible joystick with 4 integrated proportional functions
• Hydrostatic transmission
• 4-wheel drive and steering
• stabilizers
• Tilt corrector: ±10°
• Smooth approach movements thanks to inching system
• ROPS/FOPS cabin with heating and ventilation

Filed under: Aerial Work Platforms, Rental and Sales, Telehandler by Developer91
No Comments »

• Ideally suited for maintenance works
• Electric drive possible at full height
• 1.65 m (5ft 4in) stowed height allowing passage through standard doors and lifts
• 0.76 m (2ft 6in) width, very tight turning radius offering high driveability in the most congested areas
• Proportional controls allowing soft and very progressive driving
• 5 km/h (3,1mph) maximum drive speed
• Low weight allowing high autonomy
• Robust, reliable and easy to maintain

Filed under: Aerial Work Platforms, Electrical, Personnel Lift/ Mast Boom by Developer91
No Comments »