Ammann rammers are powerful, economic, operator-friendly and ergonomic in design – in short, the ideal compaction machine for your construction project. Whether trench construction, backfilling, sub-layer compaction for basements and industrial buildings or repair work on roads and pathways: Ammann rammers can cope with the toughest conditions. Both models are characterised by reliability, high compaction performance, easy serviceability, a low centre of gravity and high power reserves. All of these properties enable fatigue-free work even in the most difficult soil conditions.

• Elastically supported guide handle for fatigue-free operation
• Additional rollers and grips for easy loading and unloading
• Sure-grip, vibration-insulated guide handle
• Corrosion-free fuel tank
• Powerful and robust single-spring system
• Easily accessible recoil starter
• Throttle adjustment with automatic idle
• Integrated, super-sized fine mesh air filter, easy to clean
• Robust crank drive
• Wear-resistant ramming shoe made of high-quality plastic with integrated steel plate

Filed under: Compaction Equipment, Rammers by Developer91
No Comments »

Ammann rammers are powerful, economic, operator-friendly and ergonomic in design – in short, the ideal compaction machine for your construction project. Whether trench construction, backfilling, sub-layer compaction for basements and industrial buildings or repair work on roads and pathways: Ammann rammers can cope with the toughest conditions. Both models are characterised by reliability, high compaction performance, easy serviceability, a low centre of gravity and high power reserves. All of these properties enable fatigue-free work even in the most difficult soil conditions.

• Elastically supported guide handle for fatigue-free operation
• Additional rollers and grips for easy loading and unloading
• Sure-grip, vibration-insulated guide handle
• Corrosion-free fuel tank
• Powerful and robust single-spring system
• Easily accessible recoil starter
• Throttle adjustment with automatic idle
• Integrated, super-sized fine mesh air filter, easy to clean
• Robust crank drive
• Wear-resistant ramming shoe made of high-quality plastic with integrated steel plate

Filed under: Compaction Equipment, Rammers by Developer91
No Comments »

Ammann rammers are powerful, economic, operator-friendly and ergonomic in design – in short, the ideal compaction machine for your construction project. Whether trench construction, backfilling, sub-layer compaction for basements and industrial buildings or repair work on roads and pathways: Ammann rammers can cope with the toughest conditions. Both models are characterised by reliability, high compaction performance, easy serviceability, a low centre of gravity and high power reserves. All of these properties enable fatigue-free work even in the most difficult soil conditions.

• Elastically supported guide handle for fatigue-free operation
• Additional rollers and grips for easy loading and unloading
• Sure-grip, vibration-insulated guide handle
• Corrosion-free fuel tank
• Powerful and robust single-spring system
• Easily accessible recoil starter
• Throttle adjustment with automatic idle
• Integrated, super-sized fine mesh air filter, easy to clean
• Robust crank drive
• Wear-resistant ramming shoe made of high-quality plastic with integrated steel plate

Filed under: Compaction Equipment, Rammers, Rental and Sales by Developer91
No Comments »

Best lifting performance

• Optimised load rating
• High maximum reach capacity

Best Precision and user confort

• Full hydrostatic transmission for more confort and productivity
• Smooth boom design with everything inside for best side visibility
• Dangerous movements cut out switch

Compact and Strong

• 5 m Length
• Stabilizers lowering on a 2,26 m width

Filed under: Aerial Work Platforms, Telehandler by Developer91
No Comments »

• Hydraulic differential lock, standard 4 wheel drive, 13 in (34 cm) ground clearance improve rough terrain capability
• Continuous 360° turntable rotation
• 180° hydraulic platform rotation
• Compact travel/transport dimensions
• Full proportional controls and simultaneous boom functions improve productivity
• Robust, reliable and easy to maintain design

Filed under: Aerial Work Platforms, Diesel, Telescopic /Straight Boom Lifts by Developer91
No Comments »

The H 16 TPX is a part of  the range of telescopic boom lift (diesel aerial work platform) for  people elevation.

•  Hydraulic differential lock, standard 4 wheel drive, 13 in (34 cm) ground clearance improve rough terrain capability

•  improved working area through a positive / negative articulating fly jib with 140° movement (-70° / +70°)

•  Continuous 360° turntable rotation

•  180° hydraulic platform rotation

•  Compact travel/transport dimensions

•  Full proportional controls and simultaneous boom functions improve productivity

•  Robust, reliable and easy to maintain design

Filed under: Aerial Work Platforms, Diesel, Telescopic /Straight Boom Lifts by Developer91
No Comments »

• Electric drive
• Turntable rotation 355° without tailswing
• Stowed height 6 ft 6 in (2 m) for easy travel through doorways
• Compact turning radius 9 ft 4 in (2.85m) and width 4 ft 5 in (1.35 m) allows operation in the most congested areas
• Full proportional controls at basket
• Improved security due to load limiter in the platform
• Robust, reliable and easy to maintain

Filed under: aElectrical, Aerial Work Platforms, Electrical by Developer91
No Comments »

• Compact stowed height for easy access travel through standard doorways
• Length : 1.88m (6 ft 6 in) and width 0.76 m (2 ft 6 in) allow operation in the most congested areas
• Outside turning radius 1.80 m (5 ft 10 in) ensures excellent Manoeuvrability
• 8 cm (3 in) ground clearance allows for both inside and outside uses
• Pothole protection ensures maximum safety
• High operating autonomy
• Robust reliable and easy to maintain design

Filed under: Aerial Work Platforms, electrical, Scissor Lift new by Developer91
No Comments »

Rammax 1575 New to the trench roller range is the Rammax 1575 with both articulation and oscillation. It sets new standards regarding noise emissions and most of all fuel consumption. With the oscillation function the machine adapts to the surface and therefore allows optimised compaction results and stable running.

Four powerful hydraulic motors and two hydraulic steering cylinders guarantee dynamic drive performance and perfect mobility, even in small spaces. The fully automatic engine control system reduces the rpm to idle during standstill. With the first operation the engine rises within a split second back to working speed. This substantially helps to reduce the Diesel consumption and noise emmissions.

The Rammax 1585 is the latest development of the existing skid steer controlled trench rollers. So, today, this machine sets the benchmark regarding compaction results and maneuverability in smallest work space. Large reductions have also been made concerning the noise emissions by using a completely new design of the exhaust system. These enormous noise reductions guarantee a comfortable use for the operator today.

Filed under: Rammax Trench Rollers by Developer91
No Comments »

AP 240 The latest generation of Ammann rubber tyre rollers was developed according to the most recent insights into compaction on both bituminous asphalt layers and natural surfaces. A high-impact kneading effect is a property unique to pneumatic tyred rollers. The high wheel load and elasticity of pneumatic tyres provide a constant sealing effect. The AP 240 represents the worldwide proven hydrodynamic driven 10 to 24 tonne PTR.

Benefits at a glance

• Powerful Cummins engine and hydrodynamic drive
• Ballasting from 9,500-24,000 kg
• Central tyre inflation system for optimum tyre pressure
• Patented isostatic front axle with two dipping cylinders
• Sprinkler system
• Spacious panorama cab, heated and ventilated
• Perfect view of the working environment
• Simple to operate through two workplaces
• Large operating temperature range from -15 to +45° C
• Large ballast box 1.8 m³
• Water proof frame for fast and simple ballasting
• Small turning radius
• Hydrostatic steering
• Good service point accessibility

Filed under: Compaction Equipment, Pneumatic tyred rollers, Rental and Sales by Developer91
No Comments »